Powder coating equipment  includes powder coating booth, powder curing oven, conveyor systems and surface cleaning equipment by using   powder electrostatic adherence principle to the surface of product.

In contrast of  liquid paint coatings, powder coating has thicker  coatings and the most important is the powder could be recycled.

We have two types of powder coating line:

• Thermo curing
• Thermo plastic

Thermo curing is most often electrostatically applied by spraying in a booth provided with a recovery system with cyclone or with filter only. Often the booth system used is a fast colour change system. After application the powder is cured in an oven either infrared or convection or a combination, at approximately 80-220 oC.

Thermo plastic powders (like e.g. nylon) are wide applied by dipping (sintering) in a fluidized powder hopper. The products are then preheated to 200-300 oC and dipped into the powder.This process is used when the products have a need for a thicker layer or when the products have a complex interior geometry.

Charvies presents  three type of powder recycling system:

• Small cyclone combined with filter recycling system.
• Bag type filter element recycling system
• Big cyclone combined with filter recycling system.

Charvies is able to design the powder coating line based on the dimensions, shape and capacity of your product, and also we offer manual, automatic and semi-automatic type.

Powder coating booth will be constructed based on your product size, According to the size of product and the transporting velocity, we design different size of powder coating booth and arrange different quantity of spray guns.